How to regularly maintain the loading and unloading platform

Update:19-04-2021
Summary:

Once the hydraulic oil becomes darker, sticky, or mixed […]

Once the hydraulic oil becomes darker, sticky, or mixed with other materials, please replace it immediately; otherwise, the hydraulic power will be weakened.Check out whether the rollers, intermediate shafts & bearings, oil cylinder hinge pins & bearings, and cantilever hinge shafts & bearings are worn or not. If so, immediate maintenance or replacements should be taken action.Each linked parts should be added some lubricating oil to prolong the service life of bearings and the dock ramps.

 

Vertical cargo lift is an auxiliary lift equipment that has strong steel structure and loading capacity so as to be used in a wide range of workplaces, including warehouses, factories, wharves, construction sites and some centers of goods. It has high-strength load capacity with customized platform size and lifting height, to cater to a wide range of lifting applications. This article plans to explain why cargo lift, also goods lift, is the best loading and unloading solution for construction site.Replace the old hydraulic oil with the new one.Cargo lift used in construction site can be installed against the wall on which there are doors to unload the building materials from the cargo lift platform.

 

Customized platform size and loading capacity can serve different work sites, and the lifting process of the cargo lift can be controlled both on the ground control box and on each floor digital control panel. With a little training on the operation methods and safety rules, operators or workers can use the cargo lift to assist the construction work, saving labor and increasing efficiency. Never continue using the old hydraulic oil, or the moving parts in hydraulic systems will be worn quickly.

 

Examine all the hydraulic pipes and joints, and make sure all pipes are in good condition and all joints are tightened up.Take down and separate the lowering valves, and clean the plunger pistons with the compressed air. Then reinstall the plunger pistons and lowering valves.In addition to the monthly and annual maintenance on the hydraulic dock ramps, daily examinations should also be heeded to reduce the invisible hazards as much as possible. In general, how well a machine performs largely depends on how careful the owner take care of it. 

0